|
|
|
|
The ATOP SE5408 Industrial Serial Server has 8 RJ45 serial ports and 2 relay outputs. RS-232/422/485 is selectable for each port. This 19" rackmount serial server transmits data between serial & TCP/UDP devices. It features dual 10/100 Mbps Ethernet and is configurable through the SerialManager program, a web browser or a Telnet console. It has a 9 Pin D-Sub connector with an LCM display and menu buttons for ease of use. It uses LEDs to show the current status of the ports, indicating whether a connection is active or if data is being transmitted. The SE5408 has a power input around 100-200V AC.
System
|
Watchdog
|
Hardware built-in
|
Ethernet
|
Compliance
|
IEEE802.3
|
Port
|
2-port
|
Transmission Rate
|
10/100Mbps
|
Connector
|
RJ-45
|
Link Mode
|
TCP Server
|
Up to 8 connections or Virtual Com mode
|
TCP Client
|
Up to 2 destinations
|
UDP Server
|
|
Serial
|
Interface
|
RS-232/422/485 software selectable
|
Ports
|
8-port
|
Baud Rate
|
110bps~921Kbps
|
Flow Control
|
None, Software: Xon/Xoff, Hardware: RTS/CTS
|
Protection
|
15KV ESD
|
Power
|
Input
|
AC 100 ~ 200V
|
Consumption
|
< 8.5W
|
Approval
|
EMC
|
FCC, CE, RoHS
|
Environment
|
Operating
|
0 C ~ 60 C ( 32 F ~ 140 F )
|
Dimension
|
W x H x D
|
436mm x 43.5mm x 200mm
|
Software
|
Configuration
|
Web Page / Telnet / Serial console / Windows utility
|
Virtual Com
|
Windows & Linux port redirection software
|
Support Protocol
|
ICMP, TCP(UDP) / IP, DHCP client, NTP, DNS, SNMP, SMTP, HTTP, Telnet
|
ATOP SE5408 8 Port Serial Server
|
|
|
|
|
|
|