|
|
|
|
The Suns SND4111-SL-C safety limit switch has a glass fiber reinforced plastic housing with a plunger. The single conduit housing has an M20 cable entry. 1NO/1NC slow action changeover contact block. The contacts are galvanically separated, with a positive opening for the NC contact. 4 x 90 degree actuator positions. The screw terminals with self lifting clamps promote easier wiring. Meets the standard set by EN 50047. These limit switches can be used in different applications and industries, including industrial automation, packaging, material handling, and construction equipment.
Specifications
- Conduit- M20
- Body Style- Single Conduit
- Contact Block- 1NO/1NC Slow Action Changeover
- Operation- Plunger
- Overall Dimensions- 30.5mm Width x 31mm Depth x 74.5mm Height
- Operating Speed- 0.05mm-2m/sec
- Operating Frequency- Mechanical: 120 ops/min Electrical: 30 ops/min
- Insulation Resistance- > 100MOhm @ 500 VDC
- Contact Resistance- < 25mOhm
- Rated Current/Voltage- 10 A / 600 VAC
- Electrical Rating- UL/cUL Listed(E216958) for AC15 A600/ DC13 Q300
- Dielectric Strength-1000VAC for 1 min between non-continuous terminals
2500VAC for 1 min between each terminal and ground
- Lifespan- Mechanical: 10,000,000 Electrical: 500,000
- Operating Temperature- -25 - 80 C (-13 - 176 F) without formation of ice
- Humidity- < 95% RH
- Protection Class- IP 67 (Total protection from dust and temporary immersion in water - 1 meter (3.28') for up to 30 minutes)
- Approvals- UL, CUL, CSA, CE, CCC
Suns SND4111-SL-C Limit Switch with M20 Single Conduit
|
|
|
|
|
|
|