 |
 |
 |
|
This Seifert KH 800-400 unit is a 400W, 230V control cabinet fan heater. It has a built-in thermostat, with a housing made from aluminum. A switch controls the two fan settings, which regulate when the fan powers on. The pilot light easily lets you know if the heater is on. Both Celsius and Fahrenheit temperature ranges are labeled on the unit.
It has a lightweight design that does not require a lot of maintenance and is intended to be panel mounted.
- Thermostat built-in
- Switch operated fan settings
- Panel mounted
- Lightweight
- Low maintenance
- Light shows when heater is on
- Disperses warm air throughout enclosure
- Temperatures indicated in Celsius & Fahrenheit
Specifications
- Housing Material- Aluminum
- Heating Power at 10 C- 400 W
- Operating Temperature Range- -4 F to +104 F (-20 C to 40 C)
- Dimensions- 7.48 x 4.09 x 4.61 in.
- Rated Voltage- 230 VAC @ 50 / 60 Hz
- Rated Current- 1.9 A
- Approx. Fan Airflow- 25.9 cfm
- Fuse Rating- 3 A (T)
- Approvals- CE, C UR US
Seifert KH 800-400 Cabinet Heater Downloads
230V 400W Electric Heater Seifert 801400A44000
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
Humidity and condensation can collect inside a control cabinet if the internal temperature does not stay consistent. Extra moisture can cause damage to the inside components or even a disruption in performance. The risk of this sort of damage is reduced through the Seifert 801400A44000 electric heater, which disperses warmer air evenly on the inside. For optimum results, this unit should be mounted inside the cabinet, near the bottom, away from dust or water exposure.
Electrical enclosures used in outside applications benefit the most from an internal heater.
The fan will automatically come on when the heater does, or can be set to run continuously whether or not the heater is on. The heater works by taking in the cooler air through the bottom of the unit, while releasing warmer air through the top. The thermostat triggers the heater on when the temperature goes below the desired point. The temperature is adjustable from -4 F to 104 F(-20 C to 40 C). Overheating can occur if there is not enough airflow, or if the fan does not come on at the right times. To prevent this, the heater has an auto-reset over-temperature thermostat that will shut it off.
|
|
|
|
|
|
|