|
Sealcon CD13AR-BX black nylon cord grip for hazardous locations is liquid tight to 150 psi. PG 13 thread, Accommodates .20" - .35" (5 - 9 mm) O.D cable. Sold Individually. (Locking nut & O-Ring sold separately) Also known as Hummel #1.291.1301.15
Thread Size/Type
|
PG 13 / 13.5
|
- Polyamide V0 Material with Buna-N Seal
- Operating Temperature - - 20 C to 95 C (- 4 F to 203 F)
- International Approvals - ATEX/IECEx, CE, CSA, Gost and German Lloyd
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- UL f1 (746C) UV/Ozone stable
- Vibration Resistant Dome
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE approval
|
Through Hole Dia.
|
.8" (20.3 mm)
|
Body Length
|
1.06" (27 mm)
|
Thread Length
|
.35" (9 mm)
|
Wrench Flat Dome/Body
|
.94" (24 mm)
|
Sealcon PG 13 nylon plastic hazardous location cable glands are especially useful in applications that need exceptional performance and fire resistance without twisting the cable. Also known as strain relief fittings or cord grips, they provide a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. Hazardous location fittings are ATEX approved, meaning they are intended for use in potentially explosive environments. This cord grip is designated Ex-e, indicating increased safety. Switching out the standard or reduced inserts increases flexibility. Sealcon patented overlapping clamping splines, recessed custom grommets help protect your cable from damage and the elements. The CD13AR-BX fitting creates a large amount of Pull-out resistance by applying even force on all points of the cable.
Sealcon CD13AR-BX Hazloc Cord Grip with Reduced Insert
|
|
|