 |
Sealcon CD29N1-BR high quality nickel plated brass cord grips are designed for the toughest applications. Also known as Hummel 1.697.1000.70 (insert Hummel 1.089.2900.19). Sold Individually.
Locking nut sold separately.
Specifications
- Thread Size: 1" NPT
- Through Hole Diameter: 1.35" (34.3 mm)
- Body Length: 1.14" (29 mm)
- Thread Length: .75" (19 mm)
- Wrench Flat Dome: 1.57" (40 mm)
- Wrench Flat Body: 1.57" (40 mm)
- Number of Holes: 6
- Hole Diameter: .26" (6.5 mm)
Features
- Nickel Plated Brass Material with Buna-N Seal, Nylon 6/6 Splined Bushing & Buna-N O-Ring
- Rated IP 65 (NEMA 4x)
- Achieving IP 68 (NEMA 6) is possible, provided that there is an ideal fit
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL Registered
- CE
- German Lloyd
- PCT Approval
Sealcon 1" NPT Nickel Plated Brass Multi-hole Cable Glands, Strain Relief Fittings or Cord Grips are used in many industries when attaching wire or cable to different applications. It is possible for this cable gland to provide a NEMA 4x (IP 65) rating. In order for that to happen, the cable must not be less than 80% of the diameter of the hole. There also cannot be more than .04" (1 mm) of difference between the cable's diameter and the hole's diameter. The NEMA 6 (IP 68) submersible rating may be possible, but testing of the fitting may be required to confirm it. The ACME thread on the CD29N1BR dome top is self locking, with the overlapping splines creating an even seal and keeping the form seal from coming out of the fitting. It also provides pull-out protection for your cable so no damage is caused.
Note: Image is an approximation, actual part may differ
Sealcon CD29N1-BR PG 29 Brass Cable Gland
|
|
|