 |
Sealcon CD21N1-BR high quality nickel plated brass cord grips are designed for the toughest applications. Also known as Hummel 1.697.3400.70 (insert Hummel 1.089.2100.19). Sold Individually.
Locking nut sold separately.
Specifications
- Thread Size: 3/4" NPT
- Through Hole Diameter: 1.05" (26.7 mm)
- Body Length: .98" (25 mm)
- Thread Length: .51" (13 mm)
- Wrench Flat Dome: 1.18" (30 mm)
- Wrench Flat Body: 1.18" (30 mm)
- Number of Holes: 4
- Hole Diameter: .24" (6 mm)
Features
- Nickel Plated Brass Material with Buna-N Seal, Nylon 6/6 Splined Bushing & Buna-N O-Ring
- Rated IP 65 (NEMA 4x)
- Achieving IP 68 (NEMA 6) is possible, provided that there is an ideal fit
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL Registered
- CE
- German Lloyd
- PCT Approval
Sealcon 3/4" NPT Nickel Plated Brass Multi-hole Cord Grips, Strain Relief Fittings or Cable Glands are used to connect wire or cable to various applications. They can be found in a wide range of industries. This cable gland is able to provide a NEMA 4x (IP 65) rating. However in order to achieve that rating, the cable cannot be less than 80% of the diameter of the hole. In addition, the difference in diameter between the cable and the hole cannot be more than .04" (1 mm). The fitting should be tested to see if the NEMA 6 (IP 68) submersible rating is possible. The ACME thread on the CD21N1BR dome top is self locking, with the overlapping splines creating an even seal. This keeps the form seal from coming out of the fitting and also gives pull-out protection for your cable so no damage is caused.
Sealcon Nickel Plated Brass Cable Gland with NPT Thread CD21N1-BR
|
|
|