 |
Sealcon CD11A1-BK high quality nickel plated brass cord grips are designed for the toughest applications. Hummel 1.697.1100.01 (insert Hummel 1.089.1100.19). Sold Individually.
Locking nut sold separately
Specifications
- Thread Size: PG 11
- Through Hole Diameter: .73" (18.5 mm)
- Body Length: .87" (22 mm)
- Thread Length: .24" (6 mm)
- Wrench Flat Dome: .79" (20 mm)
- Wrench Flat Body: .79" (20 mm)
- Number of Holes: 2
- Hole Diameter: .12" (3 mm)
Features
- Nickel Plated Brass Material with Buna-N Seal, Nylon 6/6 Splined Bushing & Buna-N O-Ring
- Rated IP 65 (NEMA 4x)
- Achieving IP 68 (NEMA 6) is possible, provided that there is an ideal fit
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL Registered
- CE
- German Lloyd
- PCT Approval
Sealcon PG 11 Nickel Plated Brass Multi-hole cable glands are found in many different industries, and are used when connecting cable to various applications. This strain relief fitting can provide a NEMA 4x (IP 65) rating. To make that possible, the cable cannot be less than 80% of the diameter of the hole. The difference in diameter between the cable and the hole also cannot be more than .04" (1 mm). Testing may be needed to confirm if the NEMA 6 (IP 68) submersible rating is achievable. The ACME thread on the CD11A1BR dome top is self locking, ensuring that the overlapping splines apply an even seal. This keeps the form seal from being pulled out of the fitting & provides pull-out protection for your cable so no damage is caused.
Sealcon CD11A1-BR Cable Gland with 2 Hole Insert
|
|
|