The Red Lion PAXLRT00 PAX LRT Lite series RTD temperature panel meter has a 4 digit, red LED display in a 1/8 DIN housing. It takes RTD inputs and translates them into temperature readings. It can display Fahrenheit or Celsius temperatures with a 0.1 or 1 degree resolution. The three function keys on the front establish settings and programmable features. This panel meter also features built in functions that alert the user of any problems. This device is not made to directly command motors, valves, or actuators without safeguards. AC powered.
Features
- 1/8 DIN Housing
- 4 Digit, Red LED Display
- Accepts standard 3-wire 100 OHM RTD Sensors (ALPHA = 0.00385 or ALPHA =0.00392)
- Conforms to ITS-90 Standards
- Selectable Fahrenheit or Celsius with 0.1 or 1 degree resolution
- Programmable Temperature Offset
- Programmable Digital Filtering
- Hi/Lo Reading Memory
- NEMA 4X/IP65 - Front Panel
Red Lion PAX LRT Lite Series User Manual
PAXLRT00 Temperature Panel Meter
Display 4 digit, 0.56" (14.2 mm) red LEDs Power Requirements AC Power: 85 to 250 VAC, 50/60 HZ, 6 VA Isolation: 2300 Vrms for 1 min. between input and supply (300 V working voltage) Range 0.1° res: -199.9 to 850.0 C (-199.9 to 999.9 F); 1° res: -200 to 850 C (-328 to 1562 F) Lead Resistance Effect 20 Ohm max., 2.5° C/Ohm error for V exc. and common lead unbalance Accuracy: 0.3° C, @ 23 C and 30 min. warm-up Reading Rate: 2.5 readings / second Response Time: 2 seconds to settle for step input. (increases with programmable digital filtering Low Frequency Noise Rejection Normal Mode Rejection: 40 dB @ 50/60 Hz (may be improved by programmable digital filtering) Common Mode Rejection: 120 dB, DC to 50/60 Hz Standards Compliance UL Recognized Component, File # E179259, UL61010A-1, CSA C22.2 No. 61010-1 UL Listed, File # E137808, UL508, CSA C22.2 No. 14-M95 Type 4X Enclosure rating (Face only), UL50 IECEE CB Scheme Test Report # 04ME11209-20041018 IEC 61010-1, EN 61010-1: Safety requirements for electrical equipment for measurement, control, and laboratory use, Part 1. IP65 Enclosure rating (Face only), IEC 529 Electromagnetic Compatibility: See user manual Physical Operating Temperature: 0 C to 60 C (32 F to 122 F) Storage Temperature: -40 C to 80 C (-40 F to 176 F) Humidity: 85% max. relative humidity (non-condensing) Span Drift: 50 ppm/ °C Zero Drift: 0.001 C/°C Vibration to IEC 68-2-6: Operational 5 to 150 Hz, in X, Y, Z direction for 1.5 hours, 2 g's. Shock to IEC 68-2-27: Operational 30 g, 11 msec in 3 directions Altitude: Up to 2000 meters Construction: NEMA 4X/IP65 outdoor use, One piece bezel/case; flame resistant; panel gasket & mounting clip Connection: High Compression Cage-Clamp Terminal Block Wire Strip Length: 0.3" (7.5 mm) Wire Gage: 30-14 AWG copper wire Torque: 4.5 inch-lbs (0.51 N-m) max. Dimensions: 1.95" x 3.8" x 4.2"
|