Hirschmann GDM 2011 J Gray Solenoid Valve Connector with center screw (P/N: GDMZRG211000, Hirschmann order code: 932106-106). The GDM 2011 DIN 43650 / ISO 4400 (EN 175301-803) Form A connector has 2 Poles + Ground, an 18 mm Pin Spacing, gray fiberglass reinforced polyamide housing, and a PG 11 cable entry which accommodates 6 mm to 9 mm cable. Hardwired. Type of connection: screw termination. The GDM-series rectangular connectors are water and dust proof to IP 65 standards, and are strong enough to withstand high loads. The GDM 2011 J Gray is a versatile, tailored, industrial connector that can be used for nearly every application in which hydraulic, pneumatic and electro-magnetic actuators have to deliver dependable service. Most often used as a solenoid valve or sensor connector. The rectangular connectors of the GDM-series are well-equipped to handle the demands of field operation. What's Included: (1) GDM 2011 J Gray Connector & (1) M3 x 35mm Nickel Plated Brass Center Screw.

Installation-friendly, thanks to a large pinplate cable connecting area
High flexibility in terms of cable diameter and length
No compromises in safety: international VDE, UR, CSA, GL approvals
Patent-protected combination clamp for connecting stranded wires, fork-type cable lugs or ring eyelets
For voltages up to 400 VDC and for currents up to 16 Amps
Protection class up to IP 65
Note: See images for drawings

Specifications

Housing Color- Grey
Type of Contact- screw termination / cable shoe / cable eye
Contact Spacing- 18 mm
Number of Poles- 2 Poles + Ground
Housing Dimensions- 34.2mm H x 53mm L x 27.5mm W
Cable Entry- PG 11 - Accommodates 6 mm to 9 mm cable
Maximum Conductor Size- 16 AWG
Center Screw- M3 x 35
Gasket- No Gasket
Nominal Current- 250 VAC / 16 amps
Operating Temperature- -40 F to +257 F
Protection Class- IP 65
Contact Resistance- <= 4 mOhm
Contact Surface Material- Sn
Contact Bearer Material- PA
Contact Bearer Housing- PA
Inflammability Class Housing- 94 HB
Inflammability Class Contact- 94 V0
Approvals- UR, VDE, SEV, CSA, CE, ROHS

The Hirschmann GDM series of solenoid valve connectors is made to withstand the stresses of hydraulic, pneumatic and electromagnetic actuator and sensor installations. When your application requires a durable solution, the GDM-series is completely within its element. For this reason, the GDM 2011 J connector features a high load capacity and is used with solenoid valves, pressure sensors, flow controllers and in heating equipment in control systems for gas appliances and oil burners. In construction machines, conveyor installations, or other vibration-endangered devices and structural components, it is possible to have a highly reliable solution with the use of crimp technology. Options for built-in electronic components can include rectifiers, optical status displays and protective elements, which allow the GDM-series to be connected to devices where these functions have not been integrated. Last but not least, the GDM-series can be used wherever a "metal-free" environment is required, for example in the food sector, or the chemical industry

Guide to DIN 43650 Solenoid Valve Connectors

Hirschmann GDM 2011 J Grey DIN 43650 Connector