 |
Hirschmann GDM 3011 J Gray Solenoid Valve Connector with center screw (P/N: GDMZRG311000, Hirschmann order code: 932109-106). The GDM 3011 DIN 43650 / ISO 4400 (EN 175301-803) Form A connector has 3 Poles + Ground, an 18 mm Pin Spacing, gray fiberglass reinforced polyamide housing, and a PG 11 cable entry which accommodates 6 mm to 9 mm cable. Hardwired. Type of connection: screw termination. The GDM-series rectangular connectors are dust and waterproof to IP 65 standards, while also being strong enough to withstand high loads. The versatile and tailored GDM 3011 J Gray industrial connector is useful in almost every application where hydraulic, pneumatic and electro-magnetic actuators have to deliver reliable service. Most commonly used as a solenoid valve or sensor connector. The rectangular connectors of the GDM-series are well-equipped to deal with the stresses of field operation.
What's Included: (1) GDM 3011 J Gray Connector & (1) M3 x 35mm Nickel Plated Brass Center Screw.
- Installation-friendly, thanks to a large pinplate cable connecting area
- High flexibility in terms of cable diameter and length
- No compromises in safety: international VDE, UR, CSA, GL approvals
- Patent-protected combination clamp for connecting stranded wires, fork-type cable lugs or ring eyelets
- For voltages up to 400 VDC and for currents up to 16 Amps
- Protection class up to IP 65
- Note: See images for drawings
Specifications
- Housing Color- Grey
- Type of Contact- screw termination / cable shoe / cable eye
- Contact Spacing- 18 mm
- Number of Poles- 3 Poles + Ground
- Housing Dimensions- 34.2mm H x 53mm L x 27.5mm W
- Cable Entry- PG 11 - Accommodates 6 mm to 9 mm cable
- Maximum Conductor Size- 16 AWG
- Center Screw- M3 x 35
- Gasket- No Gasket
- Nominal Current- 250 VAC / 16 amps
- Operating Temperature- -40 F to +257 F
- Protection Class- IP 65
- Contact Resistance- <= 4 mOhm
- Contact Surface Material- Sn
- Contact Bearer Material- PA
- Contact Bearer Housing- PA
- Inflammability Class Housing- 94 HB
- Inflammability Class Contact- 94 V0
- Approvals- UR, VDE, SEV, CSA, CE, ROHS
The Hirschmann GDM series of solenoid valve connectors is made with the demands of hydraulic, pneumatic and electromagnetic actuator and sensor installations in mind. When a rugged solution is required for your application, the GDM-series is fully within its element. For this reason, the GDM 3011 J connector features a high load capacity and is used with solenoid valves, pressure sensors, flow controllers and in heating equipment in control systems for gas appliances and oil burners. With construction machines, conveyor installations, or other vibration-endangered devices and structural components, it is possible to have a highly reliable solution using crimp technology. Electronic component options can include rectifiers, optical status displays and protective elements, which allow the GDM-series to be attached to devices where these functions have not been added. Finally, the GDM-series can be used wherever it's necessary to have a "metal-free" environment, such as in the food sector, or the chemical industry
Hirschmann GDM 3011 PG 11 Gray DIN 43650 Connector
|
|
|