Hirschmann GDM 2014 J Black Solenoid Valve Connector with center screw and 3-21 Flat Gasket (P/N: GDMZRB21403210, Hirschmann order code: 932107-100 + 731739-004) The GDM 2014 DIN 43650 / ISO 4400 (EN 175301-803) Form A connector has 2 Poles + Ground, an 18 mm Pin Spacing, black fiberglass reinforced polyamide housing, and a 1/2" NPT cable entry which accepts 6 mm to 13 mm cable. Hardwired. Type of connection: screw termination. The GDM-series durable rectangular connectors can withstand high loads, and are dust proof and waterproof to IP 65 standards. The GDM 2014 J Black is a tailored versatile industrial connector that works well in almost any application where hydraulic, pneumatic and electro-magnetic actuators have to provide dependable service. Most commonly implemented as a solenoid valve or sensor connector. The rectangular connectors of the GDM-series are well-equipped to meet the stresses of field operation. What's Included: (1) GDM 2014 J Black Connector, (1) M3 x 35mm Nickel Plated Brass Center Screw & (1) 3-21 EPDM Flat Gasket.

Installation-friendly, thanks to a large pinplate cable connecting area
High flexibility in terms of cable diameter and length
No compromises in safety: international VDE, UR, CSA, GL approvals
Patent-protected combination clamp for connecting stranded wires, fork-type cable lugs or ring eyelets
For voltages up to 400 VDC and for currents up to 16 Amps
Protection class up to IP 65
Note: See images for drawings

Specifications

Housing Color- Black
Type of Contact- screw termination / cable shoe / cable eye
Contact Spacing- 18 mm
Number of Poles- 2 Poles + Ground
Housing Dimensions- 34.2mm H x 57mm L x 27.5mm W
Cable Entry- 1/2" NPT - Accommodates 6 to 13 mm cable O.D.
Maximum Conductor Size- 16 AWG
Center Screw- M3 x 35
Gasket- GDM 3-21: Flat EPDM- Resists fuel oil, high/low temps, aging, impervious to gas
Nominal Current- 250 VAC / 16 amps
Operating Temperature- -40 F to +257 F
Protection Class- IP 65
Contact Resistance- <= 4 mOhm
Contact Surface Material- Sn
Contact Bearer Material- PA
Contact Bearer Housing- PA
Inflammability Class Housing- 94 HB
Inflammability Class Contact- 94 V0
Approvals- UR, VDE, SEV, CSA, CE, ROHS

The Hirschmann GDM series of solenoid valve connectors was made specifically to meet the demands of hydraulic, pneumatic and electromagnetic actuator and sensor installations. When your application requires a rugged solution, the GDM-series is completely within its element. For this reason, the GDM 2014 J connector features a high load capacity and can be used with solenoid valves, pressure sensors, flow controllers and in heating equipment in control systems for gas appliances and oil burners. Even in vibration-endangered devices and structural components, such as construction machines or in conveyor installations, it is possible to have a highly dependable solution using crimp technology. With optional built-in electronic components such as rectifiers, optical status displays and protective elements, the GDM-series can be connected to devices where these functions have not been added. Last but not least, the GDM-series can be used wherever a "metal-free" environment is necessary, for example in the food sector, or the chemical industry

Guide to DIN 43650 Solenoid Valve Connectors

Hirschmann GDM 2014 DIN 43650 Connector with Flat Gasket