Home > Industrial Ethernet Switches > Hirschmann Ethernet Switches >

Hirschmann 943686-003 RS2-TX Unmanaged Ethernet Switch

Price: $445.90

MFG P/N: 943686-003
MFG: Hirschmann / Belden
Weight (lbs): 0.5

Availability: Currently Unavailable
Product Code: 943686-003

Not Currently Available

Description

The Hirschmann RS2-TX (P/N: 943686-003) is an unmanaged industrial Ethernet Rail Switch featuring store and forward switching mode, Ethernet (10 Mbit/s) and Fast-Ethernet (100 Mbit/s), 8 x 10/100Base-TX, TP cable, RJ45 sockets, auto-crossing, auto-negotiation & auto-polarity. The RS2-TX is a networking solution that proves to be cost efficient and is intended for use in more extreme environments. It can be used for any application when managed switches are not needed, and is ideal for the field level in networks, or in small infrastructures.

Specifications

More Interfaces
Power supply/signaling contact	1 plug-in terminal block, 5-pin
Network size - Length of cable
Twisted pair (TP)	0 - 100 m
Network size - Cascadibility
Line - / star topology	any
Power requirements
Operating voltage	24 V DC (-25% to +30%)
Current consumption at 24 V DC	max. 290 mA
Power consumption	max. 7,0 W at 24 V DC
Service
Diagnostics	LEDs (power, link status, data, error), signal contact / fault relay (24 V DC / 1 A)
Redundancy
Redundancy functions	redundant 24 V power supply
Ambient conditions
Operating temperature	0 C to +60 C
Storage/transport temperature	-25 C to +70 C
Relative humidity (non-condensing)	10% to 95%
MTBF	61 years; MIL-HDBK 217F: Gb 25 C
Mechanical construction
Dimensions (W x H x D)	47 mm x 135 mm x 111 mm
Mounting	DIN Rail 35 mm
Weight	230 g
Protection class	IP20
Mechanical stability
IEC 60068-2-27 shock	15 g, 11 ms duration, 18 shocks
IEC 60068-2-6 vibration	1 mm, 2 Hz - 13.2 Hz, 90 min.; 0.7g, 13.2 Hz - 100 Hz, 90 min.; 3.5 mm, 3 Hz - 9 Hz, 10 cycles, 1 octave/min.; 1g, 9 Hz - 150 Hz, 10 cycles, 1 octave/min.
EMC interference immunity
EN 61000-4-2 electrostatic discharge (ESD)	6 kV contact discharge, 8 kV air discharge
EN 61000-4-3 electromagnetic field	10 V/m (80 - 1000 MHz)
EN 61000-4-4 fast transients (burst)	2 kV power line, 1 kV data line
EN 61000-4-5 surge voltage	power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line
EN 61000-4-6 conducted immunity	3 V (10 kHz - 150 kHz), 10 V (150 kHz - 80 MHz)
EMC emitted immunity
FCC CFR47 Part 15	FCC CFR47 Part 15 Class A
EN 55022	EN 55022 Class A
Approvals
Safety of industrial control equipment	cUL 508 (E175531)
Hazardous locations	ISA 12.12.01 Class 1 Div. 2
Shipbuilding	Germanischer Lloyd
Scope of delivery and accessories
Scope of delivery	device, terminal block, operating manual
Accessories to order separately	rail power supply RPS 30, RPS 80 EEC or RPS 120 EEC, 19" installation frame

Hirschmann 943686-003 Industrial Ethernet Switch