| | |
|
| |
| | |
|
Privacy Policy
Return Policy
Frequently Asked Questions
|
|
1-port RS-232(D-Sub) serial server without adapter
|
SE5001-S2
|
|
The Industrial Serial Server SE5001 is a cost effective gateway
between Ethernet (TCP/IP) and serial signal communications. It
allows almost any serial device to be connected to a new or existing
Ethernet network.
|
Detailed Description
[Click Here for Product Manual] (zipfile)
Easy to Use
Flexible configuration options enable this unit to be setup over
Ethernet by Telnet, Web browser, Serial Console, or other Windows
utilities. Packed in a rugged metal housing for wall or DIN-Rail
mount with 5~30VDC wide power input range, SE5001 is ideal for
almost any industrial and manufacturing automation.
ATOP Virtual COM software provides existing Windows based
application to access serial device by mapping to remote serial
server via Ethernet.
Specially Designed for Automation Fields
In industrial and manufacturing automation fields, SE5001 is used
as a field device to connect Ethernet through TCP/IP protocol
directly. It is also specially designed for conjunction with PLCs,
HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans,
Shop Floor Control Systems, and Pick-to-Light Systems.
- Cigarette pack size
- Rugged metal case with
DIN-Rail/wall-mount
- Watch Dog Timer 1.34 sec. hardware auto
reset
- 15KV ESD protection for serial signals
- 10/100Mbps Fast Ethernet full duplex auto
negotiation
- Support TCP server/client, UDP for
Virtual COM mode and Tunneling mode
- Monitor, manage and control industrial
field devices remotely
- Configuration: Web server page/Serial
Console/Telnet Console
- Monitor IP configuration for Windows
- Upgrade firmware from remote-PC via
Ethernet
- Redundant dual DC power inputs for
non-stop operation S
|
System
|
|
CPU
|
|
|
Flash
|
|
|
RARAM
|
|
|
EEPROM
|
|
|
Watchdog
|
|
| Ethernet |
|
Compliance
|
|
|
Port
|
1-port
|
|
Transmission Rate
|
10/100Mbps Auto-detection
|
|
Connector
|
RJ-45
|
|
Auto MDI/MDI-X
|
Yes
|
| Link Mode |
|
TCP Server
|
Single connection or Virtual Com
mode
|
|
TCP Client
|
|
|
UDP
|
Single destinationfont>
|
| Serial |
|
Interface
|
|
|
Ports
|
1-port
|
|
Baud Rate
|
|
|
Parity
|
None, Odd, Even, Mark, Space
|
|
Data Bits
|
7, 8
|
|
Stop Bits
|
1, 2
|
|
Flow Control
|
None, Software: Xon/Xoff, Hardware:
RTS/CTS
|
|
Protection
|
15KV ESD
|
|
Connector
|
9-pin
D-Sub
|
| Power |
|
Input
|
DC 5 ~ 30V
|
|
Consumption
|
Max. 1.5W
|
| Approval |
|
EMC
|
FCC Class A, CE Class A
|
| Environment |
|
Operating
|
0°C ~ 60°C ( 32º
~ 140ºF )
|
|
Storage
|
-40º ~ 85ºC ( -40º~ 185ºF ), 5 ~
95%RH
|
| Dimension |
|
W x H x D
|
65mm x 78mm x
28mm
|
| Software |
|
Configuration
|
Web Page / Telnet / Serial
console / Windows utility
|
|
Virtual Com
|
Windows port redirection software
|
|
Support Protocol
|
ICMP, TCP(UDP) / IP, DHCP
client, SNMP, SMTP, HTTP, Telnet
|
|
|