ATOP 4-port Modbus Gateway

ATOP

MB5404

2 LAN & 4-port RS-232/422/485(D-Sub) modbus gateway without power adapter	MB5404
Atop's 4-port Modbus Gateway features Diverse Hardware Infrastructure, Switching between Modbus Protocols, Modbus ID Routing and Simple Integration for Complex Configurations

Your Price: $599.00

Quantity:

Detailed Description

	Datasheet		Quick Start Guide		Manual		Certificates
	Firmware		Utility		FAQ		Others

Diverse Hardware Infrastructure

Modbus Gateway supports the four most commonly used communication interfaces, RS-232/485/422, and Ethernet. The ease-of-use configuration utility provided with Modbus Gateway can quickly select the hardware interface, and easily switch to the existing communication infrastructure.

Switching between Modbus Protocols

Modbus Gateway supports the standard Modbus protocol and is capable of converting any Modbus protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces.

Modbus ID Routing

Modbus Gateway is not only capable of hardware and protocol conversions, and when a Modbus ID conflict occurs, the Modbus Gateway also supports ID routing to the existing Modbus hardware.

Simple Integration for Complex Configurations

Modbus Gateway supports various types of hardware communication interfaces, Modbus protocol conversion, and Modbus ID routing. Therefore the Modbus Gateway can integrate your existing and complex Modbus hardware configuration into a simple network that can be easily managed.

System
CPU	266MHz
Flash	2+8 MB ( 2MB for Bootloader )
RAM	128M Bytes DDR
EEPROM	8K Bytes
Watchdog	Hardware built-in
Ethernet
Compliance	IEEE802.3
Port	2-port
Transmission Rate	10/100Mbps Auto-detection
Connector	RJ-45
Auto MDI/MDI-X	No
Link Mode
ModBus TCP	Yes
ModBus ASC	Yes
ModBus RTU	Yes
Serial
Interface	RS-232/422/485 software selectable
Ports	4-port
Baud Rate	110 bps~921 Kbps
Parity	None, Odd, Even, Mark, Space
Data Bits	5, 6, 7, 8
Stop Bits	1, 2
Flow Control	None, Software: Xon/Xoff, Hardware: RTS/CTS
Protection	15KV ESD
Connector	9-pin D-Sub
Power
Input	DC 9 ~ 30V (DC Jack)
Consumption	Max. 6W
Approval
EMC	FCC Class A, CE Class A
Environment
Operating	0°C ~ 65°C ( 32º ~ 140ºF )
Storage	-40º ~ 85ºC ( -40º~ 185ºF ), 5 ~ 95%RH
Dimension
W x H x D	197mm x 37mmx 112mm
Software
Configuration	Web Page / Serial console / Windows utility
Virtual Com	Windows SmartCom
Support Protocol	ModBus TCP/ASC/RTU,DHCP Client,SNMP,SMTP,HTTP